sensors Accesorios

Resultados: 165
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS Producto Tipo
SparkFun Accesorios SparkFun This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing lightly the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change w Plazo de entrega no en existencias 2 Semanas
Min.: 1
Mult.: 1

Sensors
DFRobot DFRobot Accessories High-performance expansion cable kit for UNIHIKER M10 and K10 enables plug-and-play sensor and actuator connectivity without expansion shields. Simplifies setup for rapid IoT and embedded projects. Plazo de entrega no en existencias 4 Semanas
Min.: 1
Mult.: 1
Cable 20cm Male-to-Male Cable
SparkFun Accesorios SparkFun This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view so not only can the AK9753 detec
N/A
Min.: 1
Mult.: 1

Sensors Presence Sensor
DFRobot DFRobot Accessories UNIHIKER M10 expansion ecosystem enables AIoT projects via Gravity interface. Connect 16+ sensors, vision modules, actuators without wiring. Bridges Python to hardware for rapid builds like irrigation, security systems. Plazo de entrega no en existencias 4 Semanas
Min.: 1
Mult.: 1
Starter Kit Python Starter Kit
SparkFun Accesorios SparkFun This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light the stronger the base bias. Simple to use! Simple breakout board available below.Documents:Hookup GuideDatasheet No en existencias
Min.: 1
Mult.: 1

Sensors
SparkFun Accesorios SparkFun RedBot Sensor Mechanical Bumper No en existencias
Min.: 1
Mult.: 1

Sensors
SparkFun Accesorios SparkFun Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p No en existencias
Min.: 1
Mult.: 1

Sensors
SparkFun Accesorios SparkFun Temperature Sensor - TMP36 N/A
Min.: 1
Mult.: 1

Sensors
SparkFun Accesorios SparkFun The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se No en existencias
Min.: 1
Mult.: 1

Sensors
SparkFun Accesorios SparkFun This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo No en existencias
Min.: 1
Mult.: 1

Sensors
SparkFun Accesorios SparkFun This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors with 5V ranges. The face of the meter is 45x45mm over No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun CR1225 lithium metal 3V 12mm 47mAh coin cell batteries. Perfect small battery for miniature sensor node applications.These batteries are sold in single units.Note: This battery is not available to ship to Alaska or Hawaii or through any express serv
Battery Holders Battery Holder - Coin Cell
Seeed Studio Accesorios de Seeed Studio Piezo Vibration Sensor 63En existencias
Min.: 1
Mult.: 1

Sensors Vibration Sensor
Seeed Studio Accesorios de Seeed Studio Weight Sensor (Load Cell) 0-500g 2En existencias
Min.: 1
Mult.: 1

Sensors Force Sensor
Seeed Studio Accesorios de Seeed Studio The factory is currently not accepting orders for this product. 2En existencias
Min.: 1
Mult.: 1

Sensors Vibration Sensor